High Quality Product for Coil-Feeding in Press-Room |
| |
|
|
ADDITIONAL FEATURES
- Accuracy to ± 0.025mm roll position is achieved through, closed-loop servo control
and precision gearing.
- When connected to the press control. advanced diagnostic
protect machinery and dies by automatically stopping the
press if a fault is detected.
- On-Screen message displayed in English.
- Smoother feeder operations with controlled acceleration profiles.
- Up to 99 parts can be pre-programmed by part number, each having unique length,
feed rate, acceleration and jerk configuration.
- Multiple cycle choices-feed before press, press before feed, or intermittent
operations - allow the user to set up the roll feed specific to his needs.
- Input Power: 230/ 415V, 3 Phase. No Transformer Required.
|
| |
ACCESSORIES & OPTIONS
- Stock Oiler.
- Programmable Rotary Limit Switch for Setting of the Safe Feed and Pilot Release
Windows, with digital crank rotation position and Press Speed Indicator consult
Factory.
- Adjustable Pilot Release Cam Pin for mounting to press ram
- Pneumatic roll release for pilot release.
- Proximity sensor to initiate feed cycle instead of limit switch.
- Screw Adjustable Press Mounting Bracket.
- Hydraulic Jack Press Mounting Bracket.
- Special Roll Finish.
- Pull-Through Straightener.
- Remote Pendant with Forward and Reverse Jog Push Buttons.
- Additional measuring wheel on strip for measurement.
|
|
| |
| Multi Press With Multi - Feed Machine (Space/ Time/ Money Saver) |
This is special application where two and more press/ marking/ stamping/ tapping units are syncronised with NC roll feed having multi feed facility with PLC logic. It has selection of manual mode and automatic mode. This configuration can produce flexible sheet metal components without need of long progressive tool or separate individual operations. Any kind of small! big batch can easily be produced as once programed you only have to load correct material and recall correct part number and feed desired batch size.
This system can have further integration with roll forming for producing finished products. |
| |
| CONTROL PANEL |
• In MANUAL MODE Each Press & Servo Feeder can be operated using individual push button on the control panel. Indicating lamp would be provided for displaying state of Feeder & Presses.
• In AUTO MODE, anyone of the program can be selected & on pressing START button, the whole program is executed with 50 steps. The program
can be edited. The display would show the machine status & feed parameters.
• Any Station can be operated in any sequence with reference to Roll Feed position.
• Also Roll Feed can have any indexing length in reference to operation of each Station Single /Jointly.
• The system can store 100 programs each with 50 steps. The programming would have
• Max. Speed of Material. )
• Max. Acceleration of Roll Feed.
• UP & DOWN timing of Punching Presses.
• Length setting of Each indexing.
• Decoiler-Straightener-Drive & Loop Programming.
• Job No./Edit/Set-up/Run Mode. |
| |
| |
