Introduction In the range
of sheet metal coil feeding automation,
Press Room has been redefining the industry standards
& have brought out precision levellers for straightening
of coils, strips, components, sheets.
Why Press Room Levellers are your Profitable Decision... • Field Experience of more than 15 years.
• Proper Engineering & Design
• Correct Manufacturing process
• Rigid frame work • Proper material selection & machined to highest dimensional accuracy.
• Right rollers material & right process of manufacturing. • Best machine rigidity requiring no special foundation. • Easy access to parts for cleaning & maintenance.
• Proper operator training. • Trained field technicians to support you for service &
application. • Ease of parts/spares availability.
• Single Person handling.
• Free test trials for your components at our test lab.
Standard Features *
Four-high design.
*
Manually adjustable back-up rolls
*
Small work rolls, hardened/ground/polished
*
All Straightening rolls are Powerd.
*
Integral universal geared drive.
*
Dial guage roll position indicator.
*
Oil bath gear case, sealed roll bearings,
*
positive lubrication.
*
Bolted rugged main frame in one torque resisting
assembly.
*
Main drive motor for 440V, 3ph, 50 cycle.
*
“Run, Jog-Reverse, Stop” controls, Fusible
disconnect..
*
Automatic central lubrication of work roll bearings.
*
Adjustable side guide.
* Straightening accuracy+/- 0.01 to 0.05 is achieved
* depending on input component conditions, Raw material &
hardness, roll setting, thickness variation of components.
* 17/19/21 Straightening rolls.
* Straightening roll diameter from 8mm to
200 mm to cover a wide range of jobs.
Optional Features
* Five or six high configuration for one or two side special polished sheet stock, in place
of four-high
* Chrome plated work rolls.
* Base for larger pass line
* Slant base for press coil feed operations.
* Variable speed drive and controls.
* Loop control system.
* Powered work roll positioning in place of manual.
* Remote work roll position indicators.
* Cascade rolls at entry or exit.
* Powered pinch rolls.
* Special features on request.
* Motorised adjustment of rolls with digital display.
* 25/31 Straightening rolls.
* CNC Controlled levellers offered.
Round parts are always levelled in two
directions. The most economical solution
for series production such as clutch
disks in a Twin Levelling machine. This
double levelling line consists of 2
precision part levelling units connected
by a turntable. Between the two
levelling sequences the turnable turns
the parts by 900
All above equipments are
designed for Line speed
of 12-15 Mtrs. Per
Minute.
Models of higher
capacity or Higher or
Lower Line speeds are
available on request.
Technical
specifications are
indicative and subject
to change to suit end
application.
